User Manual

Wall Installation
10 CMIU Installation and Maintenance Guide
7 Continue to guide the remaining wire through the cable exit notch
at the bottom right side of the MIU as shown inFigure 12.
Figure 12 Cable Exit Notch
Activating and Completing the Installation
1 Slide the tongue on the top of the MIU into the groove on the top of
the mounting adapter.
2 Secure the MIU to the mounting adapter using the set screw.
SeeFigure 13.
Figure 13 Securing Mounting Adapter
3 Position the magnet against the left side of the MIU directly in line
with the Neptune logo, and swipe it bringing it from the side and
around the corner to the top to activate the MIU. SeeFigure 14.
Figure 14 Activating the MIU
Cable exit notch
Set screw
End swipe here