User Manual

Wall Installation
CMIU Installation and Maintenance Guide 9
Applying the Scotchloks
1 Using Scotchloks Gel Caps, connect the register wires to the pigtail
from the MIU. SeeFigure 9.
2 Pair the wires according to the color diagram in Figure 10.
Figure 9 Gel Cap Connections
Figure 10 MIU Color Code for Wires
3 Slide the paired wires into the grooves provided until they seat into
the back of the gel cap.
4 Using an appropriate crimping tool, firmly squeeze the gel cap to
ensure a good connection.
5 Repeat this process until all connections are complete.
6 For rear cable entry, store excess wire and Scotchloks in the hollow
cavity in the back of the MIU using the strain relief guides as shown
inFigure 11.
Figure 11 Cable in Back of Mounting Adapter
Gel caps
Strain relief guide
Cable exit notch