User Manual

General Installation Guidelines
6 CMIU Installation and Maintenance Guide
Figure 3 MIU Color Code for Wires
6 If required, connect the three conductor wires to the encoder
register’s terminals per the manufacturer’s instructions. See Figure
2 and Figure 3.
7 Thread the cable around the strain relief posts of the encoder. See
Figure 4.
Figure 4 Cable Threaded Around Strain Relief Posts
8 Apply sealant liberally and ensure that it encapsulates the terminal
screws and exposed wires. See Figure 5.
Neptune requires Novaguard G661 sealant or Dow Corning compound 4.