User Manual
Table Of Contents
- 72129069 - Exhibit Cover
- CORRECTED R900 BCT3 User Manual PUBLICATION_UM R900 BCT 10.17
- R900® Belt Clip Transceiver Users’ Manual
- Setting Up the R900 Belt Clip Transceiver
- Introduction
- R900 Belt Clip Transceiver Overview
- Nomad Handheld and R900 BCT
- Unpacking and Inspecting Equipment
- R900 BCT Components
- Using the R900 BCT
- Accessing the R900 BCT Status Screen
- Using the R900 BCT to Read a Route
- Using the R900 BCT for Field Presentment and Field Service
- Updating R900 BCT Firmware
- How the Firmware Update Works
- Index
- Neptune Locations
Field Description
Date Displays the date and time as follows:
Date: MM/DD/YYYYWorks beautifully.
Time: HH:MM
Firmware Displays the version of the firmware on the
R900BCT.
Battery Displays the available battery percentages.
RF Mode Allows you to change the reading mode for the
R900BCT by clicking the drop-down selection list.
l
Efficiency –reduced RF performance and best
battery life
l
Moderate – default RF performance
l
Performance – best RF performance and
decreased battery life
Table 6 – R900BCT Status Screen Information (continued)
RF Performance Modes
This Mode can be changed from the R900BCT Status screen. The unit has three options for
the RF performance during a reading:
1 Efficiency
Reduces RF performance* and best battery life
2 Moderate
Default RF performance*
3 Performance
Best RF performance* and decreased battery life
*RF performance refers specifically to the throughput of the receiver which can impact the
speed with which readings are processed in high density areas. Range is not impacted
by these modes.
R900 Belt Clip Transceiver User's Manual 13
Setting Up the R900BeltClipTransceiver