User Manual
Table Of Contents
- 72129069 - Exhibit Cover
- CORRECTED R900 BCT3 User Manual PUBLICATION_UM R900 BCT 10.17
- R900® Belt Clip Transceiver Users’ Manual
- Setting Up the R900 Belt Clip Transceiver
- Introduction
- R900 Belt Clip Transceiver Overview
- Nomad Handheld and R900 BCT
- Unpacking and Inspecting Equipment
- R900 BCT Components
- Using the R900 BCT
- Accessing the R900 BCT Status Screen
- Using the R900 BCT to Read a Route
- Using the R900 BCT for Field Presentment and Field Service
- Updating R900 BCT Firmware
- How the Firmware Update Works
- Index
- Neptune Locations
Understanding the R900BCT LED Operating Modes
To help you better interpret the different colors for the flashing Mode LED, refer to the
following table.
State LED Colors
Unit powered OFF No color; LEDs off
Power
On-Battery 100% – 31% Green
On-Battery 30% – 16% Yellow
On-Battery 15% – 6% Red
On-Battery 5% – Critical Flashes red
Battery – Charging Flashes yellow
Mode
Normal mode Green
Unattended mode Yellow
Installed mode Magenta
Mass storage mode White
RF Mode
No reading being received Off
Receive R900/ERT packet Flashes green when receiving
Receive Advantage packet Flashes cyan when receiving
No reading received in two +
minutes
Solid red
Table 4 – R900 BCT LED Operating Modes
8 R900 Belt Clip Transceiver User's Manual
Setting Up the R900BeltClipTransceiver