User Manual
Table Of Contents
- 72129069 - Exhibit Cover
- CORRECTED R900 BCT3 User Manual PUBLICATION_UM R900 BCT 10.17
- R900® Belt Clip Transceiver Users’ Manual
- Setting Up the R900 Belt Clip Transceiver
- Introduction
- R900 Belt Clip Transceiver Overview
- Nomad Handheld and R900 BCT
- Unpacking and Inspecting Equipment
- R900 BCT Components
- Using the R900 BCT
- Accessing the R900 BCT Status Screen
- Using the R900 BCT to Read a Route
- Using the R900 BCT for Field Presentment and Field Service
- Updating R900 BCT Firmware
- How the Firmware Update Works
- Index
- Neptune Locations
Accessing the R900BCT Status Screen
The R900BCT must first be set to Normal Mode to access the R900BCT Status screen.
The following table explains how to access the status screen on the handheld.
Accessing R900BCT Status Screen
While in route
Neptune Key, System, UTILS, AMR Status =
,
8
,
2
,
8
1.
Select Advanced Options.
2.
Select the check box.
3.
Select Belt Clip Status.
From the
Synchronize
screen
TAB twice, UTILS, Belt Clip Status =
Click ,
5
,
8
1.
Select .
2.
Select
5
Utils.
3.
Select
8
Belt Clip Status.
Table 3 – R900 BCT Software Functions
R900 Belt Clip Transceiver User's Manual 7
Setting Up the R900BeltClipTransceiver