User Manual
Table Of Contents
- 14-0066 - Exhibit Cover.pdf
- PUBLICATION_UM Handheld_12.13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
- Neptune Locations
Maintaining and Repairing the Neptune Handheld System
9-6 N_SIGHT R900 User’s Manual for the Neptune Handheld System
.
Follow this procedure to display the Battery Management function.
1 With the handheld out of the cradle, turn it ON.
2 Go to the N_SIGHT R900
Login screen.
The N_SIGHT R900
Login screen appe
ars with
the Battery Manager
status information on the
display, as illustrated in
Figure 9.2.
Figure 9.2 Handheld Battery Information
The battery status indicator, located at the bottom right of the handheld
keyboard as shown in
Figure 9.1 on Page 9-3, changes color to notify the
meter reader of the battery charge status. A red light indicates that the ba
ttery
is low while a green light indicates that the battery is fully charged.
This procedure could take up to 16 hours to complete. Be sure the hand-
held can be available for th
at amount of time before beginning the cali-
bration.
ON BATTERY 87%