User Manual

Using the Field Programmer
N_SIGHT R900 User’s Manual for the Neptune Handheld System 8-41
4 Do one of the following:
• Touch Close to
close the gas configuration screen and return to
the previous screen.
• Touch SelectFMT to select a
format that is already available
for the Field Programmer.
• Touch NewFMT to create a new format and
add it to the list of
available formats.
Selecting a Gas Format
This feature allows an administrator to select formats that will be
available to field personnel for programming, as described in
“Programming the R900G Endpoint,” on page 8-18
To select a format for programming an R900
G endpoint, complete the
following steps.
1 Select Conf
igure Gas from the Field Programmer Menu. See
“Starting Field Programmer,” on page 7-4.
2 When prompted, type
your password and press
Enter. See Figure 8.37
The Gas Preferences
screen appe
ars as
illustrated in Figure 7.15.
3 Touch New
FMT.
The New Format screen
appears
as illustrated in
Figure 8.38.
Figure 8.38 Gas New Format Screen
4 Touch .