User Manual

Using the Field Programmer
8-38 N_SIGHT R900 User’s Manual for the Neptune Handheld System
1 Select 2 or 1 for Stop
Bits.
2 Select 1 or 16 for
Clock
Divisor.
3 Touch or th
e
Cus_FMT2 tab
.
The Cus_FMT2 screen
appears
as illustrated in
Figure 8.36.
Figure 8.36 Custom Format 2 Screen
4 Type an alphanumeric character in Character, if applicable.
5 From the selection list of T
okens, touch the token you want to add
to the custom format.
6 Touch .
The token you selected now appears in the Use
r Selected list.
7 Repeat steps 5 and 6 to add more characters and tokens
.
8 If there is a character or token in the User Selected l
ist that you no
longer need, touch .
The item is removed from the User Selected list.
9 Touch twice to return to the NewFMT screen.
For a list of tokens and their explanations, refer to Appendix B,Chapter ,
"Tokens List for Custom Format Screen" on page -1.