User Manual

Using the Nomad Handheld
4-24 N_SIGHT R900 User’s Manual for the Neptune Handheld System
The Stylus Calibration screen appears like Figure 4.14.
Figure 4.14 N_SIGHT R900 Stylus Calibration Screen
Calibration is simply done by touching the center of the target with
the stylus for a couple of seconds and releasing. When the target
moves to another place, repeat the operation.
4 Press the stylus on the center of the target until it moves, and then
releas
e.
Once released the target moves to the next corner
of the screen.
Remember just to touch the screen; there is no need to press hard or to
punch it.