User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
N_SIGHT R900 User’s Manual for the Neptune Handheld System 4-1
4 Using the Nomad Handheld
This chapter provides basic instructions for unpacking and inspecting
the Nomad. It also gives instructions for setting up the Nomad and
becoming familiar with the keyboard and display. This chapter also
provides help to get started with your Nomad, so that you can begin
collecting information from the field and exchange information with the
host computer.
In addition, this chapter gives procedures for
changing the system
settings, which affects how th
e handheld displays and accesses data.
Although these settings are preset by Neptune to meet the needs of most
meter reading processes, you can change some of the settings so that
they better suit your needs.
Unpacking the Nomad
Besides using normal care, you need no special instructions to unpack
the handheld or the equipment that you purchased with it.
Check that you have received all the items
you need and inspect the
items for shippi
ng damage. If you detect any damage, return the
damaged equipment to Neptune. Instructions for shipping the handheld
to Neptune are given in “Returning your Neptune Handheld System,”
on page 9-28 of this manual.
If you want to set up and configure the CE5320 handheld, see “Using the CE5320
Handheld,” on page 3-1.
Pilot Release