User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Using the CE5320 Handheld
3-20 N_SIGHT R900 User’s Manual for the Neptune Handheld System
Adjusting System Settings
System settings affect how the handheld displays and accesses data.
Although these settings are factory-set to meet the needs of most meter
reading processes, you can change some of the settings so that they
better suit your needs. These settings are typically set once and never
changed; however, you can adjust these settings any time.
Calibrating the Stylus
The CE5320 handheld has a touchscreen display that uses a stylus for
ease-of-use. Because each person’s touch differs, it is important to
calibrate the stylus to the touchscreen for the user’s own personal touch.
To calibrate the stylus, complete the following procedure.
1On the N_SIGHT R900 Login screen, press M or touch Menu.
Press
BLUE ,
To backlight the display and the
keys, if your CE5320 Handheld has
the keyboard backlight option.
Pr
essing these keys again will turn
off the backlight. These keys work
as a toggle.
Press , , then
To reboot the CE5320 Handheld.
F3
F1
Backlighting can drain the battery rapidly. To conserve the battery, use this
feature only in low light.
If you do not press a key within 45 seconds of activating this feature, the
CE5320 automatically deactivates the backlight to conserve battery power.
All functions are available without the stylus by using keyboard.
Pilot Release