User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Using the CE5320 Handheld
N_SIGHT R900 User’s Manual for the Neptune Handheld System 3-19
Quick Keys
By pressing specific keys at once, or in a particular order, you can
execute a task quickly. Certain quick key tasks can be performed no
matter what type of screen is shown. The following table summarizes
tasks that you can perform using quick keys.
DEL
.
Use the color coding to remember which keys to use with quick keys that have
two functions: to activate the function printed in blue, press the
BLUE
key first, and then press the key with a function printed in blue.
Press
To turn on the CE5320.
Press
BLUE ,
To turn off the CE5320.
Press
To enter a reading or select an item
from a menu screen.
Press
To enter a decimal point. (This is
typically required only by “floating
point” meters.)
Press
To return to the preceding screen.
Press
To enter a space when entering a
special message or other d
ata.
Press
To erase a letter, number, or
character that you have entered.
As you backspace over each letter,
number
, or character, each is
erased.
Press +
To show meter information on the
sc
reen.
F1
F1
ENTER
DEL
.
DEL
.
ESC
INS
CTL
ALT
I
@
Pilot Release