User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Using the CE5320 Handheld
3-16 N_SIGHT R900 User’s Manual for the Neptune Handheld System
• Menu Screen—select an item from the list by pressing the key
whose letter corresponds to the item that you want to select. (When
used this way, the letter/character key is called a hotkey.)
• Data-Entry Scr
een—enter a letter in the dat
a-entry screen by
pressing the key of the letter that you want to appear in the data-
entry screen or by pressing the
BLUE key followed by the letter
you want to appear in the display.
• Reading-Entry Scr
een—perform a funct
ion by pressing the key
over which the name of the function is printed in white (detailed
next).
Information Keys
The information keys on the handheld are the letter/character keys that
have information printed in white above them. You can enter, change, or
view the following information about a meter or a route by pressing the
appropriate key whenever a reading-entry screen is shown in the
display.
Information keys only work when logged into the handheld (Production
Mode).
Toggles between the Automatic Meter Reading
(AMR) mode: R900 Keyed Advantage
R300.
Accesses the Codes menu allowing you to enter
trouble codes or customer notes depending upon
the type of import file you are using.
Allows you to turn the Edit mode ON. In edit mode,
you can type information on screens that allow text
entry.
A
<
C
=
E
[
Pilot Release