User Manual

Table Of Contents
Maintaining and Repairing the Neptune Handheld System
N_SIGHT R900 User’s Manual for the Neptune Handheld System 9-11
Removing or Replacing the Handstrap
Follow this procedure to remove the handstrap for cleaning or to install
a new handstrap.
Equipment
To remove or replace the handstrap, you need the following equipment:
One small, flat-blade screwdriver
If you are replacing the handstrap, one replacement handstrap
(p
ackage of 4), part no. 12249-012
Removing
Follow this procedure to remove the handstrap from the CE5320 for
cleaning or replacement.
1 Using a small, flat-bladed screwdriver
, turn the single screw that
secures the hand
strap to the top of the back panel counterclockwise
to remove it. See Figure 9.8.
Figure 9.8 Removing Screw From Back Panel
2 Remove the plastic washer.
3 Keep the screw and washer. You can use them later to install the
new handstrap.
Pilot Release