User Manual

Table Of Contents
Using the Field Programmer
N_SIGHT R900 User’s Manual for the Neptune Handheld System 8-21
6 You can program another gas register by repeating steps 1 through
5, or touch to return to the main screen.
Querying the R900G Endpoint
Use the query function to check the current configuration of the R900G.
Perform a query after you program the endpoint, or anytime you want to
verify that the correct parameters are programmed in the unit.
To query an R900G endpoint, place the mouse on the R900G endpoint
an
d complete
the following steps.
1 Select Pr
ogram Gas
from the
Field Programmer
Menu.
2 Select the Query tab
.
The Gas Query screen
appears. See Figure 8.23.
Figure 8.23 Gas Query Screen
Pilot Release