User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Gathering Route Data
6-32 N_SIGHT R900 User’s Manual for the Neptune Handheld System
Moving Through Reading Entry Screens
The handheld moves from one reading-entry screen to the next in one of
two ways:
• When reading meters, the N_SIGHT R900 software automatically
advan
ces to next met
er in the route after you enter a reading or a
skip code for the current meter on the route. See “Entering a
Reading,” on page 6-3.
• you can move
FORWARD or BACKWARD when you are on
the reading entry screen to display the next meter or previous meter
in the route with
out entering a reading. The key that you press
depends upon the route direction icon that you establish. Refer
to “Entering a Reading,” on page 6-3.
Reviewing Additional Information for an Account
Each reading entry screen has two additional screens you can view by
simply pressing the or arrow keys. These screens contain
location and hazard codes, and the statistics for the loaded routes.
Location or Hazard Codes
To view location or hazard codes, follow this procedure.
Continually pressing the up or down arrow keys while on an account cycles
between the three available screens, the Main Reading screen, the Hazard
screen and the Route Statistics screen.
Pilot Release