User Manual

Table Of Contents
Gathering Route Data
6-22 N_SIGHT R900 User’s Manual for the Neptune Handheld System
Removing a Reading
In some cases, you may need to clear or delete a reading. For example,
if you make a mistake entering a reading and need to enter it again.
Follow this procedure to clear an existing reading from the handheld.
1 Display the reading
entry screen of the
meter whose
read-
ing you want t
o
clear. See Figure
6.24.
Figure 6.24 Reading to be Cleared
2 Press . Then touch , and touch .
You can only clear or reset readings for the same day. If you completed
readings for a previous day, you cannot reset the readings.
Pilot Release