User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Setting Up the R900 Belt Clip Receiver
5-2 N_SIGHT R900 User’s Manual for the Neptune Handheld System
Nomad Handheld and R900 Belt Clip Receiver
The Trimble
®
Nomad
®
(Nomad) handheld utilizes Bluetooth
connectivity to Neptune’s R900 BCR to receive the meter readings.
Figure 5.1 Meter Reading Cycle
Unpacking and Inspecting Equipment
Besides using normal care, you need no special instructions to unpack
the handheld or the equipment that you purchased with it.
Check that you have received all the items
you need for the type of
system configuration t
hat you are using and inspect the items for
shipping damage. If you detect any damage, return the damaged
equipment to Neptune. Instructions for shipping the handheld to
Neptune are given in “Returning your R900 Belt Clip Receiver,” on
page 2-7 of this manual.
CIS/billing
software
Host
management
software
Field
data collection
hardware
RF AMR
endpoint
Save the packing box that was used to ship the handheld. Should you ever
need to ship the handheld, you need to repack the unit in its original shipping
box. The handling involved in land and air transport often subjects the
handheld to impact beyond that which occurs during normal use. The packing
box is designed to absorb shocks and protect the handheld device during
shipping.
Pilot Release