User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
N_SIGHT R900 User’s Manual for the Neptune Handheld System 5-1
5 Setting Up the R900 Belt Clip Receiver
R900 Belt Clip Receiver
This section introduces you to the R900
®
Belt Clip Receiver
(R900 BCR). It will explain how the R900 BCR is incorporated into the
N_SIGHT R900 host software, and how it will be used by both meter
readers and operators. It wi
ll also help you become familiar with the
basic features and functions the handheld computer offers.
This chapter provides basic instructions
for unpacking and inspecting
the R900 BCR. It also gives
instructions for setting up the R900 BCR,
becoming
familiar with the display, pairing it with the handheld, and
usage.
R900 Belt Clip Receiver Overview
The R900 BCR is a software-defined receiver capable of simultaneously
receiving R900, Advantage, and Pocket Pro Reader RF transmissions.
The R900 BCR collects readings and then transfers these readings to the
handheld t
hrough the Bluetooth connection. The R900 BCR also has the
capability to receive and store R900 readings that can be imported into
the billing system
without the use of a handheld. Because the
R900 BCR is software-defined, you can apply firmware updates
in
order to ke
ep your R900 BCR current with new products introduced to
the market.
Pilot Release