User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Using the Nomad Handheld
N_SIGHT R900 User’s Manual for the Neptune Handheld System 4-19
Combination Keys
By pressing specific keys at once, or in a particular order, you can
execute a task quickly. Certain quick key tasks can be performed no
matter what type of screen is shown. The following table summarizes
tasks that you can perform using quick keys.
Use the color coding to remember which keys to use with quick keys that have
two functions: to activate the function printed in yellow, press the
YELLOW
function button first and then press the key with a function printed in
yellow.
Press once. To turn on the Nomad.
Press and hold
for five
seconds, then release. Choose
Shut Down.
To turn off the Nomad.
Press
To enter a reading or select an item
from a menu screen.
Press
To enter a decimal point. (This is
typically required only by “floating
point” meters.)
Press
To return to the preceding screen.
Press
To enter a space when entering a
special message or other d
ata.
Press
To erase a letter, number, or
character that you have entered.
As you backspace over each letter,
number
, or character, each is
erased.
Press +
To show meter information on the
sc
reen.
Pilot Release