H501 User Manual Genie Duet
H501 Introduction Introduction BonSayOn H501 Genie Duet is designed with two communication modes: Silent Mode, and Normal Mode. This will basically fit into any environments, whether you are in the office, walking or riding a motorcycle. Through the most advance Bone Conduction technology, BonSayOn H501 is just what your need for today’s mobile communication. Silent Mode The newest NVT bone conduction microphone V4.
Specifications 1. Microphone Type： 2. Bluetooth Version： 3. Bluetooth Profile： NVT Bone Conduction Mic V4.0 Bluetooth V3.0, Class 2, CSR chip HSP V1.2/ HFP V1.6 A2DP V1.2/ AVRCP V1.4 4. Operating Distance： 10 meters (open space) 5. Charge Time： Up to 2 hours 6. Music Play Time： Earbuds Headphone 8 up to hours Helmet Headphone 6 up to hours 7. Talk Time： Earbuds Headphone 9 up to hours Helmet Headphone 7 up to hours 8. Standby Time： Up to 350 hours 9. Operation Condition： -10℃~50℃, Humidity: 0~90% 10.
Key Definitions Earphone/ Charge Plug ＋ Volume Up Button Power Switch LED Indicator － Volume Down Button Signal Descriptions Search Mode： Red/Blue indicator lights Unlinked： Blue blinks twice every 2 seconds Connected： 1 Blue flash every 6 seconds Music Mode： 2 Blue flashes every 6 seconds Phone： 3 Blue flashes every 6 seconds Incoming call： Blue flashes continuously Communication Mode Exchange： 3 Red/Blue flash only Hint for Communication Mode： Air：Red flash once Bone：2 Red flashes Erase Pairing List:
To Change Communication Mode As mentioned in the beginning of this manual, there are two communication modes available for this H501. The default setting is Normal Mode, using the Air Mic. Press the Power Switch and Volume Up button at the same time for 2 seconds will trigger the mode switch from Normal Mode to Silent Mode. A low high beep sounds can be heard from the earphone together with Red/Blue flashes indicator lights 1 time to indicate the mode has changed successfully.
Bluetooth Pairing 1. Press Power Switch until the LED starts Blue/Red flashes quickly to enter H501’s pairing mode. 2. Search for H501 by using your phone/music device. For more information on how to search for a Bluetooth device, please refer to the user guide that comes with your phone/music device. 3. Select BonSayOn H501 from the list of recognized devices. Follow the onscreen prompts to confirm the selection. If a pairing code is requested, enter 0000.
Other Important Functions Auto-Answering Incoming calls will be automatically answered after two rings. In addition to auto answer, you can also do this: 1. Answer the call immediately: Press Power Switch once. 2. Reject: Press Power Switch for 2s before the end of 2 rings. 3. Ignore: Press either Volume Up or Down will keep the phone rings sustain till caller hang up the phone. New incoming call while you are on the phone 1.
Operation Guide Status OFF Turn ON Function Press Operation for 2 seconds Enter pairing mode Press for 4 seconds Reject Press for 2 seconds Incoming Ignore Auto answer Call Answer immediately Standby Press Power level indicate Double Press － Last number redial Double Press ＋ Double Press Press Voice dial Play music To change Communication mode Press Communication mode indicate Press Reset paired device list Talking Press either ＋ or － After 2 rings and ＋ for 2 seconds and ＋ Press ＋ and
Install Helmet Earphone 1. Remove the protection film from the self-adhesive tapes on the back of the earphones and attached to inner side of the helmet. Adjust earphones to a comfortable position close to your ears. 2. Attach the Velcro onto your helmet stripe. Velcro 3. Clip H501 on the Velcro and plug into earphone. 4. Installation complete. Helmet Earphone Velcro H501 Clip the H501 onto your helmet strip.
Install Velcro on Helmet Stripe Velcro Helmet Stripe 1. Attach the Velcro to the bottom side of your helmet stripe. 4.Clip H501 into the Velcro. 2. Fold one side and attach to the front side of the stripe. Clip Velcro Helmet Stripe 5. Installation complete. 3. Fold the other side up, wrapping the Velcro tightly around your helmet stripe.
H501 in a Helmet H501 Velcro 1 Please find an installation film on fan page http:\\www.facebook.com\BonSayOn 10
About Silent Mode When Silent Mode is selected, voices are collected from the Bone Conduction Mic. The sensor (on the H501 face with oval circle) should be positioned near the throat in order to have the best quality. The best position for voice collection is 4-5cm above Adam’s apple on either side of the throat. Clip the H501 on your helmet strip, allow it to rest comfortably between your throat and helmet stripe.
Troubleshooting 1. Why is the Bluetooth reception intermittent? A: Bluetooth signal can be affected or blocked by metal or by the human body. Please keep your BT device as close to H501 as possible. Flipping your BT device over may also help with signal transmission. 2. I can not use the Power Switch to play music. Also, music can not be resumed after an incoming call. A: This problem relates to your Bluetooth device (your mobile phone, for example).
Product Warranty Product Name：H501 Genie Duet Bluetooth Headset Name： TEL： Address： E-Mail ： Begining from the date of purchase, this product comes with a 1 year limited warranty. Accessories and batteries are not included in this warranty. Please carefully read the following Exclusions. Exclusions: 1. Damaged resulting from disassembling, hitting, and soaking in the water or any abnormal use of this product. 2.
