User's Manual

Chapter 4: Using Your NeoPoint Phone
NeoPoint™ 1600 User’s Guide 67
Disabling Keyguard
1. Press the POWER ON/OFF key to access the Quick Mode screen.
2. Scroll to Disable Keyguard.
3. Press Select (Soft Key 1).
Locking the Phone
NOTE:Ensure that you know the correct lock code prior to locking the
phone. Default lock code is last 4-digits of your phone number.
1. Press the POWER ON/OFF key to access the Quick Mode screen.
2. Select Lock the Phone.
3. Press Select (Soft Key 1). A pop-up window appears and displays “Lock
phone?”
4. Press Yes (Soft Key 1).
Once the phone is locked, a lock indicator will appear on the Main screen. The
phone is restricted from making calls until the lock code/password is entered.
However, you can still receive phone calls while the phone is locked.
NOTE: You may still call a number on your Emergency List even if the
phone is locked. To create an Emergency List, refer to “Creating and
Editing an Emergency List” on page 83.
The phone may also be locked by pressing and holding the END key for 5
seconds.
Unlocking the Phone
1. Press Unlock (Soft Key 1) from the Main screen.
2. Enter the code to unlock the handset.
3. Press OK (Soft Key 1).