User's Manual

122 NeoPoint™ 1600 User’s Guide
A
8. From Modems Properties window, select Standard Modem and click on
Properties button.
9. Verify the following:
General Tab:
• Baud Rate: 19,200 bps (default)
Connection Tab:
• Data Bits: 8
• Stop Bits: 1
• Parity: None
Advanced Tab:
• Flow Control: Hardware (RTS/CTS)
10. Click OK when ready.
Receiving a Data File
On Your NeoPoint Phone:
1. Ensure that your NeoPoint phone is connected to your PC and is powered ON.
2. Once the Main screen is displayed on your NeoPoint phone, press and release
the POWER ON/OFF key to go to Quick Mode.
3. Using the Navigator key, scroll to Incoming.
4. Set Incoming mode to Data In.
NOTE:Once you have set your NeoPoint phone Incoming Mode to
Data In, you cannot receive regular voice calls until you change
Incoming Mode back to Voice.
On Your PC/Laptop:
1. Open HyperTerminal.
2. Enter name and choose an icon for the connection.
3. Click OK. The Connect To window appears.
4. Under Connect Using, select the COMx (where x represents the serial port
connected to your NeoPoint modem).
5. Click on OK.