User Manual

Appendix A: Using Your NeoPoint Phone as a Modem
NeoPoint 1600 User’s Guide 99
10. Click on NEXT.
11. Select Standard Modem Types for Manufacturers and Standard 19200 bps
Modem for Models.
12. Click on NEXT.
13. Select the correct COM port.
14. Click on NEXT.
15. Click on FINISH. Close all applications and restart your PC.
16. Once your PC restarts, open CONTROL PANEL again.
17. Open MODEMS.
18. Click on PROPERTIES.
Verify the applicable following settings:
General Tab
Maximum speed = 19,200
Connection Tab
Data bits = 8
Parity = None
Stop bits = 1
Click on ADVANCED... and ensure that:
Flow Control = Hardware (RTS/CTS)
19. Click OK.
20. Click on CLOSE to exit the program.
Your NeoPoint phone is now ready to function as a wireless modem.
Using Your NeoPoint Phone to Access Dial-up
Networking
The NeoPoint 1600 phone can be used with Dial-Up Networking to access network
resources for sending and receiving e-mails or connecting to the Internet. Before you
use Dial-Up Networking, be sure that your NeoPoint 1600 modem is correctly
installed as a standard 19200 modem (see “Setting Up Your NeoPoint Modem” on
page 98 for instructions), that Dial-Up Networking is installed and that your network
protocols have been properly configured. Consult your Internet Service Provider if