User's Manual

Neo smartpen N2 Basic Operating MethodNeo smartpen N2 Product Image

Side

Pen tip (replaceable)

Power button Camera optics (recognition sensor)

Bottom

Power Off & On

1. Please charge the product fully before the first usage.

2. Press the power button shortly and LED light with sound will notify that the pen is turned on.

3. When the power is on, pressing the power button for 1 second or longer will turn off the pen with a notification sound.

4. When there are no usage for more than 30 minutes, the power will automatically turn off.

Product Reset

1. When the product does not operate correctly, or the Bluetooth is not connected, please mreset the device.

2. Pressing the power button for more than 10 seconds will reset the device and the power will turn off.with a notification sound.

Battery Charge

1. Connect the Micro USB cable provided with the product package, and connect the other side to the PC’s USB port or Smartphone charger.

2. The proper voltage is DC 5V, 500mAH. Please comply with this proper voltage (Use only the Micro USB cable)

Warning!

In order to save power, the product will enter into standby mode (low-power) when the pen is not used for more than 10 seconds. The input

signal interference could occur intermittently during the process when the pen switches back from its standby mode. In this case, try writing

again and the product will operate functionally.