Product Drawings

01. To power on the reader, press and hold the
center button on your AccuPoint Phoenix. Enter user
name and password if required.
02. Select Standard Test (when using a site plan) or
Quick Test for general sampling. Under standard
testing, select the correct site to be tested.
04. Hold the sampler
vertically and fully depress
to activate.
NOTE: the sampler must be
held vertically.
05. Mix gently for two
seconds.
NOTE: do not shake.
03. Sample your site
by “drawing” a 4” x 4”
square. With a vertical
and horizontal back-
and-forth motion
“fill” in the square.
Consistency
is critical.