User's Guide
neo.cortec
.
Page 2 of 10
Document version 1.4
1. Absolute Maximum Ratings
Under no circumstances must the absolute maximum ratings given in Table 1 be violated. Stress exceeding one or more
of the limiting values may cause permanent damage to the module.
Parameter Min Max Unit Condition
Supply voltage (VDD) −0.3 3.9 V All supply pins must have the same voltage
Voltage on any digital
pin
−0.3 VDD + 0.3,
max 3.9
V
Voltage on U.FL con-
nector
−0.3 2.0 V
Voltage ramp-up rate 120 kV/μs
Input RF level 10 dBm
Storage temperature
range
−50 150
°C
Solder reow tempera-
tur
e
260
°C
According to IPC/JEDEC J-STD-020D
ESD 750 V According to JEDEC STD 22, method A114, Human
Body Model (HBM)
ESD 500 V According to JEDEC STD 22, C101C, Charged De-
vice Model (CDM)
Table 1: Absolute maximum ratings
2. Conditions for operational use
Parameter Min Max Condition
Operational tempera-
ture
-40°C 85°C
Supply voltage, VDD 2V 3.6V
Table 2: Conditions for normal use.
3. Power consumption
TA = 25°C, VDD = 3.0 V if nothing else stated. Measured on NC1000C module. Please note that average current con-
sumption is given by Protocol Settings. The expected average current consumption can be calculated using the Congu-
ration tool provided.
Parameter Min Typ Max Unit Condition
Receive, Rx, current 19.1 20.4 mA Standard protocol
Transmit, Tx, current 36.2 mA Standard protocol
CPU activity, 5.0 mA Standard protocol, without radio activity
Sleep mode 0.5 2 µA Oscillators, except 32768Hz oscillator, are
off.
Table 3: Power consumption
Caution! ESD sensitive device.
Precaution should be used when handling the
device in order to prevent permanent damage.