User's Guide

- 39 of 42 –
neo.
cortec
.
4.4 HTU21D
This application is capable of reading temperature and humidity using the HTU21D
sensor.
The parameters that can be configured are as follows:
PreId: This value can be freely selected, and will be pre-pended the payload package.
This allows the receiver of the payload package to identify what configuration is used for
this particular package, and as such be able to interpret the data.
Destination NodeId: The 2 byte NEOCORTEC address of the destination node for the
payload packages.
Interval: The interval with which the application transmits the payload. Can be selected
in units of seconds, minutes and hours, with the fastest interval being 10 seconds, and
the slowest 24 hours.
4.5 RSSI
This application sends payload data that include a list of neighboring nodes along with
the RSSI level for each neighbor.
The parameters that can be configured are as follows:
PreId: This value can be freely selected, and will be pre-pended the payload package.
This allows the receiver of the payload package to identify what configuration is used for
this particular package, and as such be able to interpret the data.
Destination NodeId: The 2 byte NEOCORTEC address of the destination node for the
payload packages.
Interval: The interval with which the application transmits the payload. Can be selected
in units of seconds, minutes and hours, with the fastest interval being 10 seconds, and
the slowest 24 hours.