User's Guide

- 37 of 42 –
neo.
cortec
.
4.3 GPIO
When selecting this application type, a settings window is brought up which allows the
user to configure a range of parameters specific to this application:
In the Common section of the window, the user can input 3 parameters:
PreId: This value can be freely selected, and will be prepended to the payload package.
This allows the receiver of the payload package to identify what configuration is used for
this particular package, and as such be able to interpret the data.
Destination NodeId: The 2 byte NEOCORTEC address of the destination node for the
payload packages.
Interval: The interval with which the application transmits the payload. Can be selected
in units of seconds, minutes and hours, with the fastest interval being 10 seconds, and
the slowest 24 hours. The interval should be set in consideration for the Scheduled Data
Rate setting.