User's Guide

- 34 of 42 –
neo.
cortec
.
0: Do not hibernate even if there no Route to the ACM.
5 Generic Application behaviour in Alternate Mode
1: Generic Application will use the setting for Alternate Mode
0: Generic Application will use the setting for Normal Mode
4,3 ACM Presence Behaviour
Depending on the whether the ACM node is present in the network or not, the
node is behaving according to the table below:
00: ACM presence does not affect Alternate Mode setting
01: Use “Default Alternate Configuration Mode” (Bit 1 setting) if ACM is not
present.
10: N/A
11: N/A
2 Force Hibernation.
1: Hibernation mode will be entered on startup
0: Normal operation
1 Default Alternate Configuration Mode.
1: Node is in Alternate Mode when starting up.
0: Node is in Normal Mode when starting up.
Mode will be overwritten by Alternate Configuration Master once a network
connection is established.
0 Hibernation enabled
1: The node will hibernate if the condition for hibernation is met.
0: The node will not hibernate even of the condition for hibernations is met.
NOTE: Currently the node will transmit Wake Up bursts forever when in Alternate Mode.
3.4.7.3 ACM Presence Time Out to Hibernation
ID: 60
A multiple of Scheduled Data periods defining how long time it takes before the node
enters hibernation mode after ACM is no longer present in the network, if 0 timeout is
disabled.
3.4.7.4 Wake Up Burst count on Start Up
ID: 61
Defines how many wake up bursts the node will transmit after start up.
Possible values are 0 to 255: