Troubleshooting Motor is not responding Insufficient battery Please refer to the section Checking the battery level. If the battery is low, charge it at least for 2 hours and try again. A full battery charge may take about 6 hours. Warranty Neo Curtain Motor (CM-BREVE, CMRE40, CM-WRIT, CM-RT) carries an one year warranty counting from the invoice date. Normal wear and tear are excluded from the warranty. Disposal NEO CURTAIN MOTOR Works with all Neo Remote Controls RC-200 and WS -200 series Version 2.
Getting to know your Neo Curtain Motor Motor shaft HEAD button 24V power adapter CM-WRIT and CM-RT models ably Motor installation Choose one of the sides of your track, then insert the motor shaft. Twist the motor 90 degrees counterclockwise, until you hear the latch make a click sound. aS To remove the motor, keep pressed down the latch while you twist and remove the motor. Caution « Motor must be installed in a vertical position and used with curtain tracks.
Dry Contact The dry contact interface offers three control modes, 1234 Three button = control oN B Holden 9) Two button Power socket control control Boycott J 1s Interface “4 LED light Setting Three button control mode 4321 (Empty) | Action (Open) | on off off h Ly » d(Close) | off on off (Stop) off off Action time must be shorter than 15 Lm, =K1+K2 Two button control mode 4321 (Empty) Action K1 K2 «4» (Open) on off so » (Close) off on x HM (Stop) | Press any button again ra K2 Hold on control mode 4321 L (
Pairing process Up to 16 channels can be stored on the motor. Using a Neo Remote Control All our Nea Remote Controls RC200 series work with the motor, 1. Using the remote control, ea press the CHANNEL button @) as many times needed to o select the desired channel to pair the motor. RC215, RC230 Press the PREVIOUS CHANNEL or the NEXT CHANNEL buttons Instead. 2. Hold the HEAD button for 3 seconds, until the motor moves. 3.
