User's Manual

Boutons du panneau supérieur
Indicateurs LED
Alimentation, Batterie, Bluetooth
Démarrage Rapide
Bouchon ouvert à l’arrière de votre
EcoCarbon
Allumez l’interrupteur d’alimentation
Appuyez sur le bouton Marche/Veille
pour pouvoir sur votre EcoCarbon
Rechercher les connexions Bluetooth
sur votre appareil Bluetooth
Coupler les appareils Bluetooth et
écouter la musique
1
2
3
4
5
SAFETY
This product has a limited life span of use and should be replaced when it shows
obvious signs of wear.
Do not modify or remove any original component parts of the speaker. Doing so
could cause damage to the unit allowing water to ingress. A unit with water ingress
should not be charged due to potential risk of fire or shock.
Do not attempt to mount the unit except with the approved ECOXGEAR mounts.
Doing so could cause damage to the unit allowing water to ingress. A unit with
water ingress should not be charged due to potential risk of fire or shock.
Please exercise care and good judgment when using your ECOXGEAR speaker.
Audio levels should be appropriate to your environment, comply with all local
regulations, and always ensure that you can hear and be aware of any potential
hazards around you.
You should always
1) Use the ECOXGEAR speaker in accordance with any music or noise rules
and regulations.
2) Use the proper ECOXGEAR mounts if you intend to mount the unit.
3) Properly seal the ECOXGEAR prior and after each use when in humid or water
environments to avoid water damage to the internal components. Salt water /
air is particularly corrosive. Always make sure that the gaskets are sealed when
in salt water environment and the unit properly rinsed off after use.
4) Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt or
water on them prior to storage or removing the back cover.
5) Store your unit with all caps properly sealed to avoid long term internal
moisture damage inside your unit.
6) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit.
7) Return the ECOXGEAR to Grace Digital if you suspect water ingress into the
unit or if the unit has experienced a severe impact that may have affected the
integrity of the unit to take on water.
You should never
1) Charge your ECOXGEAR if you suspect water has entered the device. Charging a
device with water inside could be potentially hazardous and cause fire or a spark.
2) Use your ECOXGEAR if you have dropped it or thrown it against a hard surface
which may have destroyed the integrity of the speakers, housings or gaskets. In
the event of a severe impact to your unit please return the unit to Grace Digital
to review for potential damage.
3) Open the auxiliary door in a water environment. This could cause water to
ingress into the unit which could potentially be hazardous and cause a fire
or a spark.
4) Connect a device to the auxiliary input jack when in a water environment. The
auxiliary jack should only be used in a dry environment.
5) Attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital
for any assessments and repairs.