User Manual

Output

VENTILATOR provides a stereo output. If you connect the

device to a mixing console, turn the mixer’s panorama knobs to

the far left and right to achieve a realistic-sounding spatial

effect. If you need just a mono signal – say, in an elaborate

composite mix or when using a stage monitor or guitar amp –

tap it by plugging into the R/MONO output only.

Remote

This jack accepts two external footswitches (not pushbuttons!)

or one Hammond CU-1 type manual switch to remotely control

the Slow / Fast function. It also gives you a kill switch to stop

the rotors. Note that when you stop the rotors, the internal Slow

/ Fast button remains active.

Here are the mandatory terminal assignments for footswitches:

STOP SLOW / FAST

S1 S2