User Manual

10
IV. SPECIFICATIONS
Signal processing 32 Bit SHARC DSP
Analog Digital Conversion 48khz, 24 Bit
Digital Analog Conversion 48khz, 24 Bit
Noise Level -80 dBA
Input Sensivity 0 dBV (Hi), +6 dBV (Lo)
Input Impedance 1 MOhm
Output Level +6 dBV
Output Impedance 100 Ohm
Recommended Load Impedance 10 KOhm or greater
Weight 1,1 kg / 2 lbs 7 oz (without
Power Supply)
Dimensions (W x D x H) 192 x 153 x 55 mm / 7-9/16
x 6 x 5-5/32 inch
Mains Voltage 100V-240V, 47Hz-63Hz
Current Draw < 300mA
Connectors Input Mono
Output L
Output R / Mono
Remote
Controls Speed Trim
Acceleration Trim
Rotor Balance
Drive Gain
Mic Distance
Effect Bypass
Slow / Fast
Hi / Lo Gain
Key / Git (Speaker
Simulation on/off)
Options Hammond CU-1 Halfmoon
Switch