User's Guide

3
How to use:
A. Charge：
1. Connect the USB charging cable to the headphones and a USB
source;
2. LED lights red during charging, and turns off when charged.
B. Pairing:
1. With the headphones turn off, press and hold M until the LED
flashes blue and red rapidly;
2. On your device, turn on the Bluetooth function, and set it to search
for Bluetooth devices.
3. Select Nenos from the list of found devices.
4. When paired, the LED flashes blue slowly.
Note:
⚫ During pairing, if the headphones are not connected to a device
within 5 minutes, they automatically ture off.
⚫ When successfully paired, your headphones automatically
reconnects to the most recently paired device when switched on.