Warranty

B. Pairing:
1.With the headphones turned off, press and hold
M unl the LED flashed blue and red rapidly.
2.On your device, turn on the Bluetooth funcon, and
set it to search for Bluetooth devices.
3.Select NENOS-02 from the list of found devices.
4.When paired, the LED flashes blue slowly
Note:
·During paring, if the headphones are not connected to
a device within 5 minutes, they automacally turn off.
·When successfully paired, your headphones
automacally reconnect to the most recently paired
device when switched on.
C. Trouble shoong Pairing
In case of problems pairing, you may need to clear
pairing before you aempt to pair again.
1.Switch on the headphones, then press and hold
for 5 seconds. The LED rapidly flashed blue and red
twice at the same me, then flash blue and red
alternately.
2.Press and hold to turn off. When you next switch
on the headphones, no longer pair automacally
Note:
To delete NENOS completely from your device memory, you
M