Specification Sheet

1.) Put bracket on the front of the grill as shown.

2.) Insert divider into the front bracket slots as shown.

3.) Lower the back of the divider so that it rests on the

back on the rollergrill. Be sure that the divider

is not resting on the drip pan.

4.) Repeat steps 2 & 3 until all the dividers are installed.

Hang cover over front bracket to cover the controls.

CORRECT

Divider Kit Instruction Sheet

Nemco Food Equipment - 301 Meuse Argonne - Hicksville, Ohio. Ph. - 419.542.7751 Fax 419.542.6690 www.NemcoFoodEquip.com

PAGE 1
Divider Kit Instruction Sheet 1.) Put bracket on the front of the grill as shown. 2.) Insert divider into the front bracket slots as shown. 3.) Lower the back of the divider so that it rests on the back on the rollergrill. Be sure that the divider is not resting on the drip pan. CORRECT 4.) Repeat steps 2 & 3 until all the dividers are installed. Hang cover over front bracket to cover the controls. Nemco Food Equipment - 301 Meuse Argonne - Hicksville, Ohio. Ph. - 419.542.7751 Fax 419.542.6690 www.