Instruction Manual

Pointe Controller User Guide Appendix C: Ladder Diagram Block Reference
349
Configuration Reference
The parameters of this block are described in the following table:
Param Name Config Var Type Description
EN Enable no - The state of the rung (off/on)
received from the left.
ENO Enable
Out
no - The state of the rung (off/on)
passed to the right.
S Set req %IX
%MX
%QX
T_DONE
The “set” input.
R1 Reset req %IX
%MX
%QX
T_DONE
Numeric
The “reset” input. This will override
the “set” input.
Q Output req %IX
%MX
%QX
The output value determined by
the “set” and “reset” inputs.