Instruction Manual

Pointe Controller User Guide Appendix C: Ladder Diagram Block Reference
347
Therefore, the block function is evaluated according to the following table:
SET
0101
RESET
0011
OUTPUT
existing
value
101
The block function is executed every time the ladder is scanned, so long as EN
remains on.
Configuration Reference
The parameters of this block are described in the following table:
Param Name Config Var Type Description
EN Enable no - The state of the rung (off/on)
received from the left.
ENO Enable
Out
no - The state of the rung (off/on)
passed to the right.
S1 Set req %IX
%MX
%QX
T_DONE
The “set” input. This will override
the “reset” input.
R Reset req %IX
%MX
%QX
T_DONE
Numeric
The “reset” input.
Q Output req %IX
%MX
%QX
The output value determined by
the “set” and “reset” inputs.