Instruction Manual

Appendix A: OptiLogic Technical Specifications Pointe Controller User Guide
290
NOTE: You can leave any or all Buttons unconfigured, but if you do, those I/O
points will not be available to your project.
Messages tab
This tab controls to two lines of the LCD on the OL3420 panel. The lines on the
panel are numbered 1 and 2, from top to bottom. Each line is mapped to a
separate 20-character String variable.
To configure a Line, click the
to the right and select a String variable from the
pop-up menu. Each variable can be used only once.
Lines can be set and changed independently of each other; text does not wrap
from one line to the next. To display text on the panel, use String commands
(Flow Chart or Ladder Block) to write the desired text to the associated String
variables.
NOTE: You can leave any or all Lines unconfigured, but if you do, those I/O points
will not be available to your project.
When you have finished configuring the panel, click OK to save your changes and
close the window.