Instruction Manual

Pointe Controller User Guide Appendix A: OptiLogic Technical Specifications
235
A.2 OL2108 Relay Output Module
The OL2108 Relay Output Module provides eight (8) optically
isolated mechanical relay outputs that can be used for
switching a variety of AC and DC loads. Individual LED
indicators provide visual feedback of output state.
Technical Specifications
Card Cage Power Required 375 mA
Output Type Mechanical relay
Outputs 8
Status Indicators Logic Side LED
Contact resistence 0.1 ohm (initial)
Contact voltage rating 0 - 60 VDC
0 - 120 VAC
Contact rating 2A (resistive) / point @24 VDC,
1A / point @120 VAC
Minimum load 10 mA
Contact type Form A (SPST)
Contact arrangement 4 relays per common
Mechanical life 10,000,000 operations per relay (at no load)
Electrical life 100,000 operations per relay (at full load)
Terminal Strip Plug In (removable)
Terminal Screws Slotted (0.1” blade max)
Max. terminal wire gauge 18 AWG (use copper conductors)
Terminal block torque 2.2 lb-in
Required Temp. rating of
field installed conductors
60°C / 75°C
Weight 2.1 oz (58 g)
Type 9
Subtype 1