Installation Instructions

Almost all impulse type sprinklers are set up in the same basic way. Here are some instructions on
how to set up your impulse sprinkler.
This piece can be screwed in more
to spread out the spray pattern. This
will also shorten the spray distance.
Or it can be unscrewed to achieve a
more streamlined spray pattern
with a further distance.
These tabs can be adjusted
anywhere to control where your
sprinkler sprays. The wire tab should
be in between the two tabs. It will
go in one direction until it bumps
into a tab, which will trigger it to
change direction.
This wire tab helps control where
your spray goes. Flip it up, out of the
way, if you want 360 degree
coverage. Flip it down if you want
limited coverage in your chosen
area.