User Manual

Table Of Contents

3.1.3 Electronic anti-shake

Turn on or off the electronic anti-shake function. Enable this function to reduce the blur caused by shake.

3.1.3.1 Press 【Menu】to bring up menu options, press【W/T】 to select "Electronic anti-shake", press

【PHOTO】to enter into the sub-menu;

3.1.3.2 Press【W/T】to select desired option:On/Off；

3.1.3.3Press【PHOTO】to save,press【Menu】again to back to video mode..

3.1.4 White balance

Adjust the color deviation of the picture according to the light source environment.

Automatic mode is recommended.

3.1.3.1 Press 【Menu】to bring up menu options, press【W/T】 to select "White balance", press【PHOTO】

to enter into the sub-menu;

3.1.3.2 Press【W/T】to select desired option: Auto / Daylight / Cloudy / Tungsten /Fluorescence

3.1.3.3Press【PHOTO】to save,press【Menu】again to back to video mode..

3.1.5Exposure

Adjust exposure value (EV) according to the environment. The higher the EV, the brighter the video, and the

smaller the EV, the darker the video.

3.1.5.1 Press 【Menu】to bring up menu options, press【W/T】 to select "Exposure", press【PHOTO】to enter

into the sub-menu;

3.1.3.2 Press【W/T】to select desired value of exposure: -3/-2/-1/0/+1/+2/+3；

3.1.3.3Press【PHOTO】to save,press【Menu】again to back to video mode.

Notice：This function is invalid when ambient brightness is low.

3.1.6 Metering mode

Set metering mode when recording.

3.1.5.1 Press 【Menu】to bring up menu options, press【W/T】 to select "Metering mode", press【PHOTO】

to enter into the sub-menu;

3.1.3.2 Press【W/T】to select desired option: Average metering/central key metering/point metering/matrix

testing；

3.1.3.3Press【PHOTO】to save,press【Menu】again to back to video mode.

3 Use the camera