User's Manual
Step 4: While still holing the button assembly mark the two larger holes on the cabinet.
Step 5: Set button assembly aside and drill two 7/32" holes at the marked locations. Verify there
are no obstructions or that the door channel will not be contacted when drilling these holes.
Step 6: Attach the button assembly to the side of the fragrance cabinet using two #10 x 3/8"
phillips truss head screws, #10 lock washers and #10 wing nuts with the stubby screwdriver.
Note: For right side mounting ip button on bracket and drill holes on the right side of cabinet.
8