User's Manual

Step 1: Attach customer service button mount to metal shelf bracket using two #10 x 3/8"
phillips truss head screws with the stubby screwdriver.
Step 2: Attach customer service button to the assembly from the above step using two #4 x
5/16" phillips pan head screws with the long screwdriver.
Step 3: Attach the nished assembly to the shelf using a #10 x 3/8" phillips truss head screw,
#10 lock washer and #10 wing nut.
Shelf Mounting Instructions
Step 4: Press the button on the front of the button assembly to verify the correct message
plays. If message does not play refer to the troubleshooting section of this manual,
otherwise installation is complete. Save the box, manual and unused hardware for future use.
6