User's Manual

Cabinet Mounting Instructions (Left Side)

Step 1: Attach customer service button mount to metal cabinet/fragrance bracket using two

#10 x 3/8" phillips truss head screws with the stubby screwdriver.

Step 2: Attach customer service button to the assembly from the above step using two #4 x

5/16" phillips pan head screws with the long screwdriver.

Step 3: Hold the completed assembly from the step above against the side of the wood or

metal cabinet at the desired height and attach with the three #6 x 3/8" phillips truss head

screws. Use the three smaller holes in the bracket.

Left side of cabinet

Note: For right side mounting ip button on bracket and attach on the right side of cabinet.

Step 4: Press the button on the front of the button assembly to verify the correct message

plays. If message does not play refer to the troubleshooting section of this manual,

otherwise installation is complete. Save the box, manual and unused hardware for future use.