User's Manual

Messager USB Duo & Duo Wireless Adapter Operation:
Step 1: To place a caller on-hold, press the corresponding line button on the Duo Wireless Adapter and place the
phone handset back in its cradle or set the phone down.
Duo
ON HOLD ADAPTER
Step 2: The LED above the line button will blink about twice a second to signify the line is on hold. If any other
DuoWirelessAdaptersareusedthoughouttheofcethenthesewillblinkaswellshowingthecurrentlinestatus.
Line 1
Hold Button
Line 2
Hold Button
Duo
ON HOLD ADAPTER
Line 1
LED
Line 2
LED
Step 3: When in the on-hold mode the calling party will hear a message-on-hold audio program that is playing
from the USB stick that was inserted into the Messager USB Duo from the previous installation steps. The
receiving partyoranyoneelseintheofcethatpicksupthephonetousethelinewillhearabeepeveryfew
seconds to signify the call is on hold.
Step 4: To take the call off-hold, pick up the phone handset then press the corresponding line button on the Duo
Wireless Adapter. The LED above the line button will stop blinking on all Duo Wireless Adapters and the caller
will be taken off-hold.
8