User's Manual

Transmitter Install Summary:

(See Installation Instruction Manual for more detail descriptions)

Step 1:LocatetheAllianceRazorDisplaycabinetsonthesalesoor.

Step 2:UsingthecabinetkeysopenPOSITION1ofthecabinetmodule(acabinetmoduleconsistsofa2x2

assembly).

Step 3: Slide the POWER switch to the ON position as they are being installed in to the cabinets. Do not turn

transmitter module power on if there will be any delay in installation.

Step 4: Through the open POSITION 1 on each cabinet module insert the Transmitter Module (front of unit fac-

ingdown,antennafacingtowarddoor)intotheexistingemptyCartridgeSleeve.MAKESUREITISINSERTED

COMPLETELY!

Cabinet Positions

Transmitter Module Sleeve Transmitter Cartridge

Step 5: Lock all cabinets.

Step 6: Transmitter Install is Complete