User's Manual
13
Transmitter Instructions:
Summary & Operation:
The Transmitter Module is a state-of-the-art 433MHz RF receiver capable of sending a 8-bit binary word to the
Receiver Module. Each Transmitter Module has 2-channels that can trigger any 1 of the 255 messages on the
Receiver Module. The Transmitter is battery operated and is rated at least one-year of operation under normal
conditions.
ENABLE/DISABLE CH1 SWITCH
PWR - This switch is used to turn the power ON and OFF. If transmitter is not plugged in to cabinet power must
be turned OFF to conserve battery life and prevent false triggers.
FREQ - This switch is used to change the units transmit frequency. All transmitters must be set to the same chan-
nelasthereceiver.Defaultissetto“A”.